How-What-Time-To-Prune-Maple-Trees-Phoenix-AZ
Regular Post
Written by webtechs

How & What Time To Prune Maple Trees

HOW & WHAT TIME TO PRUNE MAPLE TREES

GET A FREE ESTIMATE TODAY!

Are you searching for “How & What Time To Prune Maple Trees” while looking for information about how to take care of your trees? This article is designed to help you understand more about pruning, when to do it, and how to get the job done. If you’d rather have us take of the trees in your landscape Phoenix Trim-A-Tree offers Tree Pruning Services. To prune a tree is to remove certain branches and/or stems in order to benefit the entire tree.

WHAT IS THE REASON FOR PRUNING A TREE?

It’s health! Removing dead, diseased, and damaged branches will help in preventing insect and decayed organisms from getting into the tree. In order to increase the amount of air and sunlight so that there will be less problems with diseases put a dense canopy on the tree. In order to eliminate having weak wood and to provide it with more food and water remove suckers and water sprouts. In order to prevent damage that is caused by branches rubbing against one another take out all branches that are crossing one another. As a tree grows older they tend to have weak and/or narrow crotches that split apart, by removing these crotches you will keep the wood from breaking and/or tearing apart.

Take off the co-dominant leaders. The co-dominant leaders will be the two branches that are growing close to the trees top, they grow straight up, becoming equally dominant. If you cut one of them off it will allow the other one to be the dominant branch, preventing branches from splitting apart or from tearing the wood, which is generally a problem under heavy winds.

TREE PRUNING SAFETY

Using the proper pruning procedures will create and maintain a stronger tree structure, also prevents the safety hazards of low growing branches, and also the growths that form and are subject to damage from storms.

HOW DO YOU KNOW WHEN TO PRUNE A TREE?

Branches that are dead, diseased, or damaged needs to be remove as soon as they are noticed. Besides that, pruning is best done in late winter or early spring, right before trees begin to opening up their buds. Many trees, like maple and dogwood, bleeds saps during this time of each year. The bleeding doesn’t cause them any harm. Although pruning can be performed at any time, it is best to avoid do so in extremely hot or cold weather. Tree use up energy during weather that is extremely hot or cold, so if pruning is performed after its leaves has opened make certain that you give them enough time to develop their leaves fully, plus a little extra time for recuperating their energy.

HOW DO YOU GO ABOUT PRUNING A TREE?

To prune your tree corrected you need the right tools and some knowledge about where and how to cut. While safety should always be your first priority the next is knowing where to cut on your tree. Before you start cutting and affecting the future shape, health, and safety of your tree make sure to read this in full. Trees pruned correctly add value to your landscape, while over pruning or removing the wrong areas can ruin the look and structural integrity of your tree. The number one rule before ever making a cut is determining why you are pruning and what part is to be pruned. You need to start out having a plan. Next, you need to figure out what kind of equipment you are going to be using. You will generally be using hand pruners, a pruning saw, and loppers. Hand pruners: There is two different kinds of these, they are the bypass and the anvil. The bypass pruners are like scissors, whereas, there are two sharp blades involved, giving a clean cut.

For the anvil pruners, there is only one sharp blade that cuts against another blade having a flat surface. This crushes the underside tissue of the stem. The hand pruners that are recommended to get a clean cut would be the bypass pruners. Both of these type of pruners is intended to be able to cut wood that is ½ to ¾ an inch in diameter.

  • LOPPERS – Loppers come in two different types, the bypass and the anvil. There blades are larger, with longer handles, designed for cutting wood that is ¾ to 1 ½ inches in diameter. A bypass lopper is the one recommended.
  • PRUNING SAWS – The older bow saws are now being replaced by the newer tri-edge saws, which folds. These can quickly cut wood as big as 3 inches in diameter.

HOW TO GO ABOUT CUTTING

Pruning itself wounds a tree. But when it is done correctly it can actually help a tree. Of course, if it is incorrectly done the tree can be harmed by it. A couple of examples of incorrect pruning are: flush cuts and when stubs are left behind. Trees are not able to heal their own wounds. If a branch gets cut off, it stays cut off. However, trees are able to seal their wounds, if pruned correctly, what is referred to as a callus can be caused to grow sort of like a doughnut, it starts at the edge and grows inward until it covers the wound (or cut).

There is a boundary of a chemical inside of the tree that forms around the wound and separates it off. This limits potential decay that could occur. Leaving stubs and flush cuts will cause wounds not to be callus over and they cannot be sheltered by being separated by itself. These areas of the tree will merely begin rotting away. In order to prune a branch from a tree’s trunk you need to know where the bark ridge and branch collar is and be able to locate them, these two things are very important. A branch collar is merely where it swells around the base of a branch (Can be viewed in the figure).

You will find the branch bark ridge as a slightly raised area, that is dark, with rough bark which forms at the place where the branch and the truck’s tissue meet. Which are the areas of a tree that contains chemicals to initiate a calluses growth and the separation from the rest of the tree in order to protect its wound that was create from the cut. It is unhealthy to cut into these areas of a tree and needs to be avoided. There will be three cuts necessary if removing a big heavy branch from a tree to keep from tearing the branches collar.

Finally, do not go and ruin a pruning job by putting a coating on the cut using paint, and do not use wood dressing either. Years of research has proven that this does not prevent decay and does nothing to help the wound to close up. The most this will do is promote rot, as it makes the wood stay wet for a longer period of time after a rain shower. Also, you should never take a lot off of the tree at any one time.

MAINTAINING THE NATURAL TREES FORM – Sometimes erratic and vigorous branches will grow, changing the trees growth habits in other branches, resulting in the tree being misshaped. Removing these branches will help to maintain the trees natural form.
SHOULD YOU STIMULATE OR RESTRICT A TREES GROWTH – The sparse areas of a tree can have its growth stimulated by pruning it. If there is an area of the tree that is undesired, its growth can be restricted with pruning.

PHOENIX VALLEY TREE PRUNING SERVICES

If you have a tree or trees on your property that need pruning or trimming Phoenix Trim-A-Tree can help. With our certified arborist, highly trained pruning staff, and the best tools we can safely and efficiently prune your trees to achieve the best look, shape, and promote the health and safety of your trees. To schedule service simply call 480-962-0701.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Tree Pruning
0
Best-Time-To-Trim-Oak-Trees
Regular Post
Written by webtechs

Best Time To Trim Oak Trees

BEST TIME TO TRIM OAK TREES

GET A FREE ESTIMATE TODAY!

Are you searching Google for “Best Time To Trim Oak Trees“, while looking for oak tree pruning articles? If so, Phoenix Trim A Tree can help! We put together a guide to show you the best times and seasons of the year to prune or trim your oak trees. What is pruning? Pruning is something that will alter the growth and form of a plant. Based on science and aesthetics, pruning can be considered preventative maintenance. Most issues can be prevented by correctly pruning during the forming years for a shrub or tree.

REASONS FOR PRUNING

  • Pruning to promote plant health
  • Remove branch stubs
  • Removing dying or dead branched that are injured by insect infestation, storms, disease, animals or other damage
  • Remove branches that are rubbing together

Avoid topping trees. Remove the large branches leave stubs that could cause health issues. It could destroy the natural shape of the plant and promotes development and suckering of weak branch structures.

PRUNING TO MAINTAIN PLANTS IN THE LANDSCAPE

  • Maintaining a dense hedge
  • Maintaining desired special garden or plant forms
  • Encouraging fruit or flower development

PRUNING TO IMPROVE PLANT APPEARANCE

Landscape appearance is vital to the usefulness of a plant. For many landscapes, the natural form is best. Avoid shearing shrubs into geometrical forms that could affect the flowering unless it has to be trained or confined for a purpose. Whenever plants are pruned properly, it is hard to see that they have even been pruned. Pruning to:

  • Remove unwanted branches, suckers, waterspouts, and fruiting structures that take away from plant appearance.
  • Control plant shape and size
  • Keep shrubby evergreens dense and well proportioned

PRUNING TO PROTECT THE PROPERTY AND PEOPLE

  • Have hazardous trees taken down
  • Remove dead branches
  • Prune shrubs or trees that block the entry to your home
  • Prune weak or narrow tree branches that hang over homes, sidewalks, and parking areas.
  • Remove branches that interfere with traffic signals, street lights, and overhead wires. Do not prune near an electrical or utility wire.
  • Prune branches that obscure vision at intersections

PRUNING STARTS AT PLANTING TIME

Pruning is the best preventative maintenance that a young plant can get. It is vital for young trees to be trained to encourage them to develop strong features. Young trees that are pruned improperly or have not been pruned at all for year could need a lot of pruning to keep the tree from becoming deformed. At planting, remove only the broke, diseased, or dead branches. Start training a plant during the dormant seasons after the planting.

  • Remove multiple leaders on evergreens and other trees where a single leader is wanted.
  • Remove branches that grow back towards the trees center and crossing branches.
  • Remove lower branches to increase the crown and remove branches that are too close to the trunk.
  • Prune to shape young trees but don’t cut the leader.

Pruning young shrubs isn’t as vital as pruning a young tree, but it does help to use similar principles to promote positive branch structure. Shrubs grown in Containers will need very little pruning.

  • When planting deciduous shrubs o hedges, prune each plant to 6 inches off the ground.
  • When planting thin out the branches for good spacing and prune any crossing, circling, broken or diseased roots.

PRUNING LARGE ESTABLISHED TREES

Leave pruning of large trees to professionals who have the right equipment. Consider the natural form of the tree when possible. Many hardwood trees will have a rounded crown that don’t have a strong leader, and they may have lateral branches.

COMMON PRUNING TYPES

  • CROWN CLEANING – This is the selective removal of diseased, dead, and dying wood from the crown.
  • CROWN REDUCTION – This removes the larger branches from the top of the tree to reduce height. When done right, crown reduction is the least wanted practice and it should only be done when needed.
  • CROWN RAISING – This is removing the lower branches on a developing or mature tree to let there be more clearance above streets, lawns, sidewalks, etc.
  • CROWN THINNING – This is removing branches on a young tree through the crown. This helps to promote better health and form. Remove the weak branched but don’t overdo it on a mature tree.

PROPER BRANCH PRUNING

  • Always prune above a bud that is facing outside of the plant to force a new branch to grow.
  • To shorten the twig or branch, cut it back to a side branch or make the cut about a quarter of an inch above the bud.

BEST TIME OF THE SEASON FOR PRUNING

The late dormant season is best for pruning. Pruning late in winter or just before spring will leave fresh wounds exposed for just a small amount of time before a new growth begins to seal the process. Another advantage to dormant pruning is that it’s easier to make pruning choices without leaves covering the branch structure. Pruning during the right time can help you to avoid certain psychological and disease issues including the following.

  • To avoid oak wilt, don’t prune between April and October. If the oaks need to be pruned or are wounded during these time, apply latex paint or a wound dressing to mask the smell of cut wood so that beetles won’t spread oak wilt.
  • To avoid stem cankers, prune the honey locust when it’s still dormant in late winter. If it has to be pruned in summer, avoid humid or rainy weather.
  • Prune apple trees in late winter. Spring or summer pruning will increase the chance of infection and spread firelight. Autumn or early winter pruning is more likely to result in die back or drying at pruning sites.
  • There are trees that have free flowing sap that will bleed after pruning. Though this bleeding causes little issue, it could still cause concern. To prevent bleeding, you need to prune the following trees after the leaves are fully expanded in late spring to early summer. Never remove more than a quarter of the live foliage. For instance:
    • Birch and its relative’s blue beech and ironwood
    • All maples, including the box elder
    • Walnut and butternut

Shrubs that bloom new growth may be pruned in spring before the growth starts. Plants that have hardy stems like shrub roses and clematis need to be pruned to the live wood. Hardier shrubs like late blooming spires and snowball hydrangeas need to be pruned to the first bud above the ground.

USING THE RIGHT TOOLS FOR PRUNING

Using the right tools will make pruning easier and help you to do a good job. Keeping your tools well maintained and sharp will improve the performance of the tool. There are a lot of tools for pruning, but the following are best for most pruning:

  • PRUNING SHEARS – These are the most important tool. It cuts up to ¾ inches in diameter.
  • LOOPING SHEARS – These have longer handles than the pruning shear and can cut up to 1 ½ inches in diameter.
  • HEDGE SHEARS – These are just for pruning hedges. They cut small stems or succulents the best.
  • HAND SAW – These are important for cutting branches over 1 inch in diameter. Most types of handsaws are available.
  • POLE SAW – This lets you get an extended reach with a long handle, but it needs to be used carefully as it could be hard to get clean cuts with it.
  • SMALL CHAIN SAW – These need to be used on larger branched. You will need to wear protective clothing and use caution when using it. Never use a chain saw above your shoulders or when you are on a ladder.

PHOENIX TREE CARE SERVICES

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Tree Trimming
,
0
Palm-Tree-Trimming
Regular Post
Written by webtechs

How Often Do Palms Need Trimming?

HOW OFTEN DO PALMS NEED TRIMMING?

GET A FREE ESTIMATE TODAY!

Palm trees should only be trimmed with the oldest leaves (fonds) have turned brown, dry, and dead. Each year new fronds are formed and the older fonds die. Because of this the average palm only needs trimming once or twice a year.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Palm Trees
0
Palm-Tree-Trimming
Regular Post
Written by webtechs

Can You Cut The Top Off The Palm Tree?

CAN YOU CUT THE TOP OFF THE PALM TREE?

GET A FREE ESTIMATE TODAY!

While we call them trees palms are actually in a different category and unlike apple, pine, or oak trees. Palm trees do not start branching or budding out after the top is cut off, they just die. If the top is cut off your palm you will have a pole like barren trunk that just slowly rots.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Palm Trees
0
How-Fast-Do-Palm-Trees-Grow-In-Arizona
Regular Post
Written by webtechs

How Fast Do Palm Trees Grow In Arizona?

HOW FAST DO PALM TREES GROW IN ARIZONA?

GET A FREE ESTIMATE TODAY!

A lot of Phoenix valley residents are asking the question: “How fast do palm trees grow in Arizona?” How fast your palm will grow depends on the species of palm you have. Some types of palms grow as much as 2 or 3 feet per year while others might only grow to be 5 feet high after several years. When you are planning your landscape pay close attention to the species and plan for how big and fast they will grow. The growth rate of palm trees depend on a various factors which either encourage or discourage growth. Factors range from planting location, irrigation, fertilizing, and pruning. The different species all have different needs for these variables so it is a good plan to talk with your local palm tree nursery to find out how much the species you are planning on planting, or already have, will need. If you need help with Palm Tree Trimming or any palm tree related care, call Phoenix Trim-A-Tree.

PALM GROWTH RATES

When conditions are idea with the watering, fertilizer, pruning and location you can expect healthy growth in your palm trees. Different species of palm trees grow at different rates. See below to get an idea of average growth rates for palm trees.

Queen-Palm-Tree-Growth-Rate
King-Palm-Tree-Growth-Rate
Mexican-Fan-Palm-Tree-Growth-Rate
Mediterranean-Palm-Tree-Growth-Rate
Foxtail-Palm-Tree-Growth-Rate

QUEEN PALM

The queen palm when planted in USDA hardiness zones 9 through 11 grows about 2 feet each year. This means if you buy a 15 gallon plant you can expect a 25 foot Queen Palm in about 10 years. This is considered a fairly high growth speed.

KING PALM

Another fast growing palm is the King Palm. They grow quickly in soil that has good moisture and plenty of nutrition. The growth rate for the King Palm is nearly 2 feet each year. This makes it a little slower than the Queen Palm. This rate can be faster when the palm is planted in partial shade as it will grow faster towards light.

MEXICAN FAN PALM

These palm trees are one of the faster growing palm trees that is common in Arizona. They can reach dizzying heights for 70 to 100 feet which is typically too tall for most residential yards. Under ideal conditions you can expect an incredible 4 feet of growth per year from these palms. Their height and quick grow makes them very popular for commercial use or in public parks.

MEDITERRANEAN PALM

Also known as the European Fan Palm these palms are fairly slow growing. They grow about 6 inches a year and reach their mature height of 20 feet quiet slowly. They are still incredibly popular as they have a beautiful fronds and bark. They also make a great addition to most residential landscapes as they do not over power the visual presentation of the landscaping or home.

FOXTAIL PALMS

The Foxtail palm is a fast growing palm tree and under ideal conditions it can grow from 2 to 3 feet each year. They can grow to about 30 feet high and will reach that height in about 10 years. This is a great option for people looking for a great canopy and quick growing palm tree. This tree also features a deep root stem which makes it quiet drought tolerant.

PALM TREE TRIMMING & CARE

Phoenix Trim-A-Tree takes care of palm trees anywhere in the Phoenix metro area to help this iconic staple of Arizona looking their best. We trim palm trees and care for the overall health by enriching the soil with the nutrients needed for them to grow tall and strong. We can also help you understand how to best water the type and size of palms you have on your property. If you have palm trees that are sick or dead they should be cared for or removed to prevent damages or injuries on your property. If you have palms allow us to care for them and keep you safe.

WE ALSO OFFER PALM TREE REMOVAL FOR TREES THAT ARE SICK, DEAD, OR POSE A HAZARD TO YOUR LANDSCAPE.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Palm Trees, Tree Care, Tree Planting
, , , , ,
0
Palm tree with sunset
Regular Post
Written by webtechs

How Do You Fertilize a Palm Tree?

HOW DO YOU FERTILIZE A PALM TREE?

GET A FREE ESTIMATE TODAY!

Palms should not be fertilized after planting for at least a month or month and a half. Waiting helps ensure that the risk of shock has passed and gives you time to establish proper soil water saturation. Fertilizer should not be applied to dry ground and should be applied within the drip area but not on the trunk or in the fronds. If you need help caring for your fruit trees in the Phoenix area Phoenix Trim-A-Tree is your source for professional tree care. Our arborist understands the local flora and fauna and can help you get the most out of your fruit trees. Let us help you with the best advice for avoiding pests, and help you get the biggest crop through proper fruit tree trimming, pruning, and fertilizing.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Palm Trees
0
how-to-keep-birds-out-of-fruit-trees-in-arizona
Regular Post
Written by webtechs

How To Keep Birds Out Of Fruit Trees

HOW TO KEEP BIRDS OUT OF FRUIT TREES

GET A FREE ESTIMATE TODAY!

Are you searching for information about “How To Keep Birds Out of Fruit Trees”? The fruit trees in your landscape that produce cherries, apples, oranges and more look just as appetizing to birds as they do people. Without instituting some bird control measures birds in your neighborhood might eat and destroy all of your fruit before you get a chance to pick a single ripe piece of fruit.

CALL 480-962-0701
CONTACT US HERE

BIRD CONTROL MEASURES

While each type of bird control method is effective birds adjust and learn to get past single systems so using multiple methods help keep your fruit in the tree and ripening for you and your family.

FRUIT TREE CANOPIES

The tree canopy can be covered with specially designed bird netting that allows the tree to get sunlight and air, but prevents birds from eating your fruit. Netting should be over the tree and brought in tight against the trunk. Efforts should be taken to tuck fruit in away from the netting to avoid birds pecking through the material. Frames can also be built to support the netting and then place the netting over the frame so it is not in direct contact with the tree.

STREAMERS & FLASH TAPE

You can use orange safety ribbon or holographic safety tape that is highly reflective. The extra motion and flashing reflections of light scare birds away and keeps them out of your tree and away for your fruit.

SET OUT THE PIE TINS

Another common and highly reflective item that will scare bird away from your fruit is pie tins. They are shiny and lightweight. They can be hung from your tree limbs with fishing line and will move in the wind casting bright light that scares the birds away.

SET UP A SOUNDTRACK OF FEAR

Birds that will ruin your fruit are typically not predatory birds, and will be scared if they hear sounds from the things that hunt them. Predatory bird sounds from speakers that are moved around every few days keeps fruit bandits away.

PUT OUT A PREDATOR DECOY

Smaller birds are scared of the sound of bigger birds, but terrified of the sight of them. Setting up a decoy like an owl on a post near your trees will keep the birds at bay. If you have some extra money decoys are available with speakers that will play sounds of predatory birds, distress calls, and the sound of flapping wings which is extremely effective.

SET UP SMALL WINDMILLS

Spinning blades from windmills sound like predatory birds and confuse smaller fruit eating birds. Attach your windmills to PVC pipe and move them frequently to keep birds confused.

USE BALLOONS

If you are really struggling and they are getting into your trees with the other tips here you can paint eyes on balloons and put them in your tree. Smaller birds can mistake the color of balloons as large predatory birds and if they do come close enough they end up popping the balloons which also scares them away.

PHOENIX ARE FRUIT TREE CARE

If you need help caring for your fruit trees in the Phoenix area Phoenix Trim-A-Tree is your source for professional tree care. Our arborist understands the local flora and fauna and can help you get the most out of your fruit trees. Let us help you with the best advice for avoiding pests, and help you get the biggest crop through proper fruit tree trimming, pruning, and fertilizing.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Fruit Tree Care
0
how-to-tell-if-a-tree-is-dead
Regular Post
Written by webtechs

7 Warning Signs Your Tree May Be About to Fall In Phoenix

7 WARNING SIGNS YOUR TREE MAY BE ABOUT TO FALL IN PHOENIX

GET A FREE ESTIMATE TODAY!

Tress are a big part of creating beautiful landscapes, yet having hazardous trees around your yard can mean some or all branches could break due to strong winds during a monsoon. In extreme cases the entire tree could fall onto your home, or even a neighbor’s. Storm damaged tree removal is the answer if the tree is already damaged, but these signs will help you catch risks before they impact your home, your car, or your life. When trees fall and cause damages, it can cause thousands in repairs. It can also be a potentially serious safety risk for your family. Usually, home damages caused by trees are covered by home insurance (according to Insurance Information Institute), but avoiding the potential damages is the best route. No one likes filing claims, waiting on estimates, then waiting on repairs.

CALL 480-962-0701
CONTACT US HERE

BELOW ARE SEVEN SIGNS THAT YOUR TREE MAY BE AT RISK FOR CAUSING DAMAGES

Expert Arborists explain that there are usually warning signs that there is something wrong with your tree.

1 – TRUNK HAS A HOLE

The trunk can form cavities when trees self-prune by dropping branches. This may lead to decay within the tree. Although, this does not always signal danger. If the cavity has plenty of solid wood surrounding it, it’s less likely to fall, according to the United States Department of Agriculture Forest Services.

2 – DEEP CRACKS OR MISSING BARK

In parts where the three has missing bark, indents or gashes, this is referred to as ‘cankers’. Canker’s are able to increase the risk of trees breaking at the location of a canker, even when it looks good. The International Association of Certified Home Inspectors (InterNACHI) also say deep bark cracks are negative signs as well.

3 – FALLING OR DEAD BRANCHES

If your tree begins to drop partial or full branches, it can be a sign that something is not right. This is a sign that trees are attempting to make themselves smaller, to have less to feed. Dead branches are also a large risk as they can crash down on clam days, not just windy days, according to USDA Forest Services.

4 – LEANING TRUNK

The InterNACHI states if you notice your tree is leaning more than 15 degrees because of root damage or wind, it generally needs to be removed. However, a tree which naturally grew this way does not have as much risk.

5 – LEAVES FALL FROM INSIDE OUT

This is another sign that something is wrong, as tree’s should not lose leaves from inside out. Experts say this is a sign of root zone issues. “Root zone is the area that trees obtain water and nutrients, and it holds the tree up.” If the root system is not healthy, it increases the risk of falling trees.

6 – ROOTS ARE ROTTEN

It can be hard to detect root rot, but things to look for include mushrooms growing around your tree’s base. Another sign that trees are rotting on the inside are fungi growth on the trunk.

7 – TIGHT BRANCH GROWTH

If branches are growing closely in a V-shape, this is also a bad sign. Experts explain “Strong union grows in a U-shape. There are many species of trees that often break at weak forks, including maple, elm, yellow poplar, oak, and willow trees. “When winds get strong, these trees are at risk of falling apart,” she said. It is easiest to spot this sign during winter when leaves are no longer on the trees.

WHAT TO DO WITH TROUBLESOME TREES

If you are unsure if the tree around your home pose any danger, you should consult a qualified tree expert. Professionals help you avoid preventable property damage from your trees. Professionals are able to advise you in the next step, from removing a dangerous tree or developing a plan to help improve your tree’s health. Based on your particular solution, the plan may include bracing or cabling being conducted by a qualified Arborist.

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Tree Care, Tree Removal
0
Getting-Your-Trees-Ready-For-The-Hot-Summer-In-Phoenix-AZ
Regular Post
Written by webtechs

Getting Your Trees Ready For The Hot Summer In Phoenix, AZ

GETTING YOUR TREES READY FOR THE HOT SUMMER IN PHOENIX, AZ

GET A FREE ESTIMATE TODAY!

If you are searching for “How To Get Your Trees Ready For Summer In Phoenix” this is the guide for you. Summer in Arizona is famous for sunny days and intense heat. While we spend the summer staying cool inside with our AC the plants and trees in our landscapes do not enjoy such luxuries. To keep them healthy, strong, and beautiful there are some things to keep in mind.

WHICH TREES TO SELECT

The plant stock you choose should be of great quality and the type of trees you choose should be ones with lower growth amount along the main trunk. It’s very possible that if you choose the right type of trees for summer that you won’t even need guying or staking. When selecting trees at your local nursery it is important to choose drought resistant trees. These select species are better prepared to grow well in the heat of Phoenix. They are more forgiving for when people miss a watering and simply grow better because they are native either to Arizona or similar climates.

WHAT TREES TO AVOID PLANTING

Avoid trees with long trunks like the one you see ones you see in the picture, instead, try trees with shorter trunks or trees that are native to the desert climate of Phoenix. These desert type trees are able to withstand more wind damage and are adapted to the Phoenix soil, the nearby pests and other factors usual in the desert climate of Arizona. It is also good to avoid any trees which will need a lot of water. Forgetting to water these trees will have consequences and they simply do not weather as well as desert trees. Choose options like the Palo Verde Tree, Sissoo Tree, or Tipu Tree which are accustomed to the intense heat of Arizona.

WHERE & HOW TO PLANT TREES

Trees should be planted in groups to add extra protection to the surrounding trees and other plants. The location in your landscape you plant your trees should take into consideration how much sun each species needs. Some types of trees enjoy full sun all day long, others will benefit from having some afternoon shade. Ensure that trees are not planted too close to the house, power lines, or other structures. Try to plan ahead for the full mature size of the tree when choosing a spot so you don’t have to over trim or remove the tree later.

TREE PRUNING

Try not to prune too much after first planting the trees. They need all the energy they can get to ensure positive growth in the future. Do not remove the water sprouts. Look at the picture below. The water sprouts are the super small branches growing on the lower parts of the trunk and branches. These water sprouts are helpful to provide taper and additional strength to support the tree as it increases in weight over time. Water sprouts also help shade and prevent sun damage on the interior branches.

PROFESSION SUMMER TREE CARE

Phoenix Trim-A-Tree is your source for knowledgeable tree preparation for summer and general tree care. We can help take care of all the details to get your trees ready for summer. Our team is passionate about providing top notch tree trimming, tree care, and tree removal for trees which have died or have become unstable. If a tree falls in the woods, no one might hear it, but you will definitely hear it if one falls on your home or in your yard. Take the time to inspect your trees or have our team come and inspect them so you know what should be done to ensure the tree’s health and your safety. If you have questions about how to take care of your trees during the hot summer months or would like us to come take care of the job for you, give us a call!

CALL 480-962-0701
CONTACT US HERE

Recent Posts

Tree Care, Tree Planting
0
1 2 3 4 … 7

Copyright © 2010-2024 Phoenix Trim-A-Tree, LLC.. All Rights Reserved.

Website Design, Hosting, Maintenance & SEO by WebTechs.Net